< Previous | Contents | Next >

5.4.6 Step Condition Types


The following conditions can be applied to “enabled” Steps. Steps that aren't enabled won't play at all.


ALL (default) The step is always fired.


PRE The step will fire if the previously evaluated step condition was TRUE (means the closest previous step with condition was fired).


PRE not The step will fire if the previously evaluated step condition was FALSE (means the closest previous step with condition was NOT fired).


1st only The step will only fire in the first loop cycle of the (complete) pattern.


1st not The step will NOT fire in the first loop cycle of the (complete) pattern, but it'll fire in all following loop cycles.


X% Here you can select a probability percentage from 5% up to 95%. If you select 50% for example, then the step will have a 50% chance to get fired.


Xth:Y This will fire the step at ever Xth loop cycle of the (complete) pattern out of Y cycles. You can select each cycle of a range of 2-8 loop cycles, starting with 1st:2 up to 8th:8.

If you set 2nd:3 for example, then the step will only be fired at the 2nd loop cycle of the pattern, then on the 5th, then on the 8th, and so on.


 Get this Doc as PDF