18.3 Pattern Operations (G-Stomper Studio) | G-Stomper User Manual

18.3 Pattern Operations (G-Stomper Studio)‌

The operations directly related to Patterns are located in the Pattern Slot long press menu, either on the Pattern Set screen, or in the Quick Pattern Set Navigator, which is shown by long pressing the main menu button.

(Pattern Slot Menu)

Likewise you an access all Pattern related copy, swap and clear operations in the main menu on every screen.

Note:

When you access Pattern operations from the regular main menu, then you always act on the currently selected Pattern. On the Pattern Slot long press menu, you have the freedome to choose the Pattern to be used.

18.3.1 Copy Pattern (Selective Content)18.3.2 Swap Patterns (Selective Content)18.3.3 Clear Pattern (Selective Content)18.3.4 Copy FX (Selective Content)18.3.5 Copy Master/SumFX (Selective Content)18.3.6 Copy Timing & Measure (Selective Content)

< Previous | Contents | Next >

Get this Doc as PDF