Delay-Artifacts on Volume off

[neolex]

If I define a delay insert effect in the mixer on some track (Drum Sampler or VA-Beast) in G-Stomper Studio and then turn the channel volume all the way down (but without muting or solo-off), some channel's sound artifacts will still pass through, unless the delay mix is ​​set to dry. This is obviously unfortunate because I don't mute the channels on my MIDI keyboard, but rather turn the volume off.

[planet-h]

Thanks for the report, Neolex.
Are you using only delays on these channels?
Or also other fx in addition?
The best would be if you could send me a pattern or pattern set with that problem by mail.

[neolex]

Hi planet-h,
sorry, I haven't seen your reply.
In some patterns I also use an Equalizer in addition, but in others not. It also happened with only the FX INS on a channel.
To what email address shall I send the pattern?
Best regards

[neolex]

Now I have found gstomper(at)planet-h(dot)com. I will mail you a pattern...

[neolex]

I sent an example pattern by email, but I'm not sure now, if the volume of T04 in that example is all the way down (off). I left the volume a bit open, because the artifact that way doesn't appear. But on sequencer stop it appears anyway.

[planet-h]

Hi neolex

I sent an example pattern by email, but I'm not sure now, if the volume of T04 in that example is all the way down (off). I left the volume a bit open, because the artifact that way doesn't appear. But on sequencer stop it appears anyway.

Great, thanks a lot for sending an example. I got your mail.
Will check it later today.

[planet-h]

Hi Neolex
You are indeed right. Thank you very much for the report.
Looks like the ins fx out signal getd mixed into the channel output after the volume slider, which is surely wrong. Ins fx out must come back to the mix before the volume and pan slider.

Here is how it's meant to be:
https://www.planet-h.com/gstomper/docs/ ... part16.htm

And here with a bit more detail:
viewtopic.php?f=6&t=589&p=2042#p2046

Btw. It happens with all ins effect types. It's just most noticeable with the delays.

It's definitely a bug. I'll take care of it.

[planet-h]

Hi Neolex

If I define a delay insert effect in the mixer on some track (Drum Sampler or VA-Beast) in G-Stomper Studio and then turn the channel volume all the way down (but without muting or solo-off), some channel's sound artifacts will still pass through, unless the delay mix is ​​set to dry. This is obviously unfortunate because I don't mute the channels on my MIDI keyboard, but rather turn the volume off.

Good news. The bug was found. The fix goes into the next release.
Was actually a legacy bug in the code.

Thanks again for your report and for helping out with an example pattern.

[neolex]

Hi Neolex
Good news. The bug was found. The fix goes into the next release.
Was actually a legacy bug in the code.

That's great news!
Thanks also a lot for your super-fast response and bug fix !!

[planet-h]

Hi Neolex
The delay artefact bugfix is now, together with other improvements, in open beta on the play store. In the case you opted in for beta you can check it out already.

However, it will take max 2 weeks until it'll come to production.

Thanks again for your report and for the precise explanation of the issue.